BPHBR - TERRAZZO M BONDCOAT COMP B

  • MSDS: BPHBR
  • Manufacturer: CROSSFIELD PRODUCTS CORP
  • Product Name: TERRAZZO M BONDCOAT COMP B
  • National Stock Number: 5610-00N031170
Product Identification

Product ID:TERRAZZO M BONDCOAT COMP B
MSDS Date:07/01/1986
FSC:5610
NIIN:00N031170
Kit Part:Y
MSDS Number: BPHBR

Responsible Party
CROSSFIELD PRODUCTS CORP
3000 EAST HARCOURT ST
COMPTON, CA 90221
US

Emergency Phone: 213-636-0561

Info Phone: 213-636-0561

Cage: 60782

Contractor
CROSSFIELD PRODUCTS CORP.
COMPTON, CA 90221 US

Telephone: 310-886-9100

Cage: 60782

Ingredients

MODIFIED POLYAMIDE (AMINE EPOXY HARDNER)


MODIFIED ALIPHATIC AMINE (EPOXY HARDNER)


PHENOL,2,4,6-TRIS(DIMETHYLAMINOMETHYL)-; (2,4,6-TRI-PHENOL)

CAS: 90-72-2

RTECS: SN3500000

ACGIH TLV: 5 PPM, S (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SEVERE EYE IRRITATION-MODERATE
SKIN IRRITATION. CHRONIC: POSSIBLE PERMANENT EYE INJURY.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: MOVE TO FRESH AIR. GIVE O2 IF NEEDED. EYES: FLUSH WITH
WATER FOR AT LEAST 15 MIN AND CALL PHYS. SKIN: WASH WITH SOAP AND
WATER-REMOVE CONTAMINATED CLOTHING. INGEST: GIVE LARGE QTY OF WATER
AND INDUCE VOMIT-CALL PHYS.

Fire Fighting

Flash Point Method:CC
Flash Point:200F,93C
Extinguishing Media:FOAM, CO2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . TO AVOID INHALATION OF SMOKE OR VAPORS.
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC.

Accidental Release

Spill Release Procedures:SPREAD ABSORBENT MATERIAL OVER SPILL AND PLACE
IN CLOSED CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:EYE PROTECTION MUST BE WORN WHEN USING
THIS MATERIAL.
Other Precautions:STORE IN COOL DRY AREA-AVOID INHALATION OF HEATED
VAPORS AND SPRAY MISTS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:GOOD. LOCAL EXHAUST/MECHANICAL GENERAL.
Protective Gloves:CHEMICAL RESISTANT.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
KEY1;C3.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:392F,200C
Vapor Pres:15
Spec Gravity:1.00(H2O=1)
Solubility in Water:SLIGHT
Appearance and Odor:AMBER LIQUID WITH AMINE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS AND NATURAL RUBBER.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CO, CO2, NOX.

Disposal

Waste Disposal Methods:DISPOSE OF IN SANITARY LANDFILL ACCORDING TO
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.